Plasma Contour Bevel System
The cutting head can make A, V, Y, K, X and gradual bevel cuts. Cuts may be made up to 45⁰ on 2″ (50 mm) thick mild steel with the Hypertherm HPR400XD plasma cutting system. Rotational axes are configured with AC servomotors and low backlash planetary gearboxes with outputs directly driven from the gearbox. No belts or tie-rods are used. Both axes travel at speeds up to 30 RPM. The RSVS-6 torch height control consists of an AC servomotor, precision ball-screw and Hypertherm SENSOR electronics to maintain voltage control. The lifter travels at speeds up to 600 ipm (15,000 mmpm).
The spring loaded through-hole style collision sensor stops machine motion when the torch makes contact with an obstruction and automatically resets to its prior position after the obstruction is cleared. The CBS includes a on-button homing and torch alignment calibration system.
Covers protect drive systems from collision damage. Machine code for the CBS was engineered using Hypertherm ProNest programming software. The CBS is
compatible with TrueHole™ technology if cutting non-beveled cuts.
Hornet Cutting Systems proprietary compensation calculator simplifies the process of defining process compensations.
The CBS is compatible with Hornet Cutting Systems cross-hair laser alignment tool for easy plate alignment without tool offsets.
- Elimination of secondary grinding opertions
- Significant labor reduction
|Positioning Speed / Lift
|Positioning Speed / Tilt X||30 rpm|
|Positioning Speed / Tilt Y
|Torch angle positioning
|Torch Lifter stroke
||13″ (330 mm)|
|Accuracy height control
Machine Model Availability
Plasma System Compatibility