Hornet Cutting Systems’ manual plasma bevel attachment enables straight line bevels to be applied to the edges of a plate along the rail axis of the CNC plasma machine. The bevel angle is manually set by the machine operator between +45⁰ and -45⁰.
After setting the desired bevel angle on the manual plasma bevel assembly, the plasma torch is moved to the start position and the pierce height is manually set. Once cutting begins, the SENSOR torch height-control electronics drives the plasma torch lifter UP/DOWN to maintain the proper cutting height based on the measured arc voltage.
Bevel Attachment Features
- Black anodized 6061 aluminum construction
- Angles marked in 5⁰ increments
- Torch plate rotates on large shoulder bolt
- Socket head machines screw to lock into place