Mega Hornet 2000 CNC Plasma Cutting Machine

Mega Hornet 2000 CNC plasma cutting machineThe Mega Hornet 2000 CNC plasma cutting machine sets a new higher standard for accuracy, power and reliability in a heavy duty plasma cutting table.

Request A Quote

One of our largest and most capable plasma cutter systems, the MEGA HORNET 2000 can tackle nearly any job.

The Mega Hornet 2000 CNC plasma machine’s huge frame and massive servo drives will deliver decades of reliable service to shipyards, service centers and manufacturers. A welded and stress relieved gantry beam and fabricated steel end trucks enable the MEGA HORNET 2000 to span up to 20 feet (6.1m) and carry up to 12 cutting and marking processes.

The Mega Hornet 2000 plasma cutter includes the Hypertherm Edge Connect CNC control with support for True Hole™ technology. MEGA HORNET 2000 plasma cutting systems incorporate the industry’s most reliable AC servo amplifiers and servo motors, precision planetary gearboxes, precision ground cross axis linear ways and a heavy duty machined floor mounted rail system. The MEGA HORNET 2000 CNC plasma cutting machine is designed for shipyards, service centers, contract shops and manufacturers and is available in widths from 8.2′ (2.5 m) to 20′ (6.1 m). Lengths of over 150′ (45 m) can be supplied.

Literature

Mega Hornet 2000 CNC plasma cutting machine

SERCOS AC servo motorsStandard Features of the Mega Hornet 2000 CNC Plasma Cutting Machine

  • 12″ x 12″ (300mm x 300mm) Heavy Wall Front Beam
  • 8″ x 8″ (200mm x 200mm) Heavy Wall Rear Beam
  • Fabricated & Reinforced 1/4″ (6mm) Thick Steel End Trucks
  • Hypertherm Automation Edge Connect CNC Control with SERCOS Interface
  • Slave carriage stainless steel band drive
  • Low backlash planetary gear heads
  • 1,000 IPM rapid traverse (25.4m/min)
  • Triple machined floor-mounted rail system (right)
  • Dual linear ways on cross axis
  • Flexible Cable Carriers on Cross Axis
  • Main Carriage for (1) Plasma station, (1) Oxy-fuel station & (1) Marker station

 Options

  • Widths from 8.2′ (2.5 m) to Machined heavy-duty floor mounted rail system20′ (6.1 m)
  • Rail Systems to 100 ft (30.5 m) or More
  • Up to two Contour Bevel Systems
  • Up to four plasma torch height control stations
  • Up to twelve oxy-fuel stations – straight cutting
  • Plasma Torch Lifter with AC Servo Driven Ball Screw
  • Plasma Torch Collision Mount
  • Digitally controlled heavy-duty electronic oxy-fuel gas manifold
  • Phoenix software oxy-fuel cut chart screen captures
  • Alignment Camera
  • Over-head cable carriers
  • Automatic Lubrication Systems
  • HydroCLEAN water tables with adjustable water level
  • AeroCLEAN zoned and ducted air exhaust table
  • Dust collection systems
  • Programming software
  • Plate Markers (air scribe or plasma)
  • Cross-hair laser pointer

CNC Control Cabinet

EDGE Pro Panel Mount CNC with Hornet Cutting Systems Operator Panel

Edge Connect Panel Mount

EDGE Pro Panel Mount CNC with Hornet Cutting Systems Operator Panel

Edge Connect Remote Pesestal

Plasma THC Technology

SENSOR THC electronics and Hornet Cutting Systems RSVS-5 Lifter:

  • Delivers Hypertherm Rapid Part Technology with ProNest and collision avoidance
  • 600 IPM (15 m/min) vertical positioning speed
  • Pierce height sensing using Ohmic or position error stall detection
  • Maintains torch to plate height during cut via voltage regulation
  • 14″ (356 mm) stroke travel for torch positioning
  • 50-300 VDC Arc Voltage Range in .1 volt increments
  • Pneumatic plasma torch collision mount with E-Stop to CNC

THC Control Parameters:

  • Transfer height
  • Pierce height
  • Pierce time
  • Cutting height
  • Cutting voltage
  • Retract height after cut

 

Request A Quote
Whatever heavy duty cutting you have lined up, the Mega Hornet 2000 CNC plasma cutting machine will handle it with ease while providing reliable, efficient and accurate cuts. Contact us for a free quote or call 1-844-209-5552 today to learn more.

Recommended Plasma Cutters

Hornet Cutting Systems suggests the Hypertherm mechanized plasma cutting products listed below for use with our Mega Hornet 2000 model. Other products may be offered depending upon your application.

Hypertherm HPR130XD

HPR130XD

Hypertherm HPR800XD

HPR800XD

Hypertherm HPR260XD

HPR260XD

Hypertherm HPR400XD

HPR400XD

Related CNC Plasma Cutting Machines & Solutions

MEGA HORNET 1000

MEGA HORNET 1000

Steel plate rack
Steel Plate Rack