Hypertherm Basic Series HyPrecision Waterjet Pump

HyPrecision waterjet pump

HyPrecision 15, 30 & 50 Waterjet Pumps by Hypertherm

CNC waterjet technology produces excellent cut quality with low edge angularity, zero heat-affected zones, narrow kerf, and virtually dross-free cutting. With a narrow kerf, waterjet technology produces excellent fine-feature cut capability. Waterjet also offers the ability to process a variety of materials and a thickness range capability unmatched by other cutting technologies.

HyPrecision Waterjet Pump Features

Waterjet control station - Aqua Hornet CNC Cutting TableControl Station with PLC

  • Touch pad interface
  • Electric motor on/off control
  • Intensifier on/off control
  • Monitor system
  • System warning and shut down
  • Pierce and cut pressure controls
  • Wye-delta motor starter

Hydraulics & Electrics

  • UL-approved electrical control panel
  • Totally enclosed force cooled (TEFC) electrical motor
  • Pressure compensated hydraulic pump
  • Kidney loop keeps oil cool when pump is in standby
  • Oversized heat-exchanger

Construction Features

  • Precision welded tubular steel frame for maximum strength and rigidity
  • Adjustable leveling feet
  • Control station

Additional Features

  • Inlet water boost pump and water filtration to .45 micron
  • Large volume attenuator minimizes pressure fluctuations
  • Safety dump valve relieves system pressure in case of shutdown

Waterjet Pump Specifications

System specifications for the HyPrecision 15, HyPrecision 30 and HyPrecision 50:

HyPrecision 15 HyPrecision 30 HyPrecision 50
Maximum Output Flow 0.30 gpm (1.14 lpm) 0.60 gpm (2.27 lpm) 1.0 gpm (3.79 lpm)
Maximum Orifice 0.007″ (0.178 mm) 0.011″ (0.279 mm) 0.014″ (0.356 mm)
Continuous Output Pressure Adjustable to 60,000 psi (4137 bar) Adjustable to 60,000 psi (4137 bar) Adjustable to 60,000 psi (4137 bar)
Intensifier Configuration Single Single Single
Pressure Control Dual manual Dual manual Dual manual
Bleed-down Valve Air Air Air
Motor Power 15hp (11.2 kW) 30hp (22.4 kW) 50hp (37.3 kW)
Voltage 400 V (50 Hz)
208-230/460 V (60 Hz)
400 V (50 Hz)
208-230/460 V (60 Hz)
400 V (50 Hz)
208-230/460 V (60 Hz)
Full Load 24 A (50 Hz)
43-39/19 A (60 Hz)
44 A (50 Hz)
83-75/38 A (60 Hz)
73 A (50 Hz)
135-122/61 A (60 Hz)
Main Breaker 25 A (50 Hz)
50/25 A (60 Hz)
50 A (50 Hz)
100/50 A (60 Hz)
100 A (50 Hz)
175/100 A (60 Hz)
Overall Width 34″ (864 mm) 34″ (864 mm) 34″ (864 mm)
Overall Length 70″ (1778 mm) 70″ (1778 mm) 70″ (1778 mm)
Overall Height 46″ (1168 mm) 46″ (1168 mm) 46″ (1168 mm)
Approx Operating Weight 2900 lb (1315 kg) 2900 lb (1315 kg) 2900 lb (1315 kg)

Related CNC Waterjet Equipment